Understand the Receivers page
Find a device, connect, change speaker volume and disconnect in one place.
| Control | What it does |
|---|---|
| Find receivers automatically | Finds supported network services while the app is open. Turning it off does not turn off your Wi-Fi. |
| Scan again | Starts a manual scan. With automatic discovery off, the manual scan ends after about 30 seconds. |
| Receiver name + protocol | Tap this row to start the permission and connection flow. A device can appear under a supported AirPlay or UPnP route. Discovery does not guarantee playback. |
| Speaker volume | Changes the connected receiver’s volume where its protocol supports it. This is different from the phone’s volume and the read-only input meter in Listening. |
| Disconnect icon | Ends the selected receiver connection. Valid audio-sharing authorization can remain temporarily available for reconnecting. |
| Settings icon | Opens supported options for that receiver. AirPlay offers connection details, delay and saved-credential actions. |
| Connection details | Shown beside a failed receiver. Gives a technical summary to help diagnose the failure. It omits passwords, track titles and network addresses. |
| Share a local stream link | Creates a local audio URL for a compatible network player after you approve capture. See the HTTP / HLS guide. |
If a device disappears
Check that it is powered on and on the same network. Tap Scan again. Guest networks, client isolation and routers that block local discovery can hide otherwise compatible receivers.
One receiver at a time
The current app selects one receiver or local-stream output. Disconnect it before choosing another. Synchronized multiroom and HomePod stereo groups are not implemented.
Reference app capture; layout and edition labels can differ.
Select picture to enlarge